Nanjing Movelaser Co., Ltd.
MOVELASER Laser Wind Measurement Solution Expert.
Add to Cart
The recommended replacement cycle for wipers is 6 months Wind lidar
1,Product introduction
The recommended replacement cycle for the wiper is 6 months. If the wiper is damaged before the replacement cycle, please replace it in time. Radar uses lasers to measure wind. Please do not look directly into the radar laser window unless necessary.
2,Product parameters
| Powered by | 24V DC / 100~240V |
| Power | 70W |
| Size | 682mm x 520mm x 641mm |
| Weight | <75kg |
| Range of working temperature | -40℃ ~ 50℃(with over temperature protection) |
| Operating humidity range | 0% to 100% |
| Protection class | IP67 (complete machine) |
| Eye safety | Class 1M (EN60825-1) |
| Measuring distance | 30~300m |
| Measurement layer | 12 |
| Sampling rate | 1Hz |
| Wind speed measurement accuracy | 0.1m/s |
| Wind direction measurement accuracy | 1° |
| Wind speed measurement range | 0~75m/s |
| Wind direction measurement range | 0~360° |
| Sweep cone angle | 28° |
| Data output | Horizontal wind speed, vertical wind speed, wind direction Timestamp, GPS, temperature, humidity and pressure, statistics |
| Data Format | ASCII |
| Communication | Ethernet (100BASE-TX) 3G/4G WiFi, satellite communication (optional) |
3,Application scenarios
① Early detection of wind resources
② Offshore construction and operation and maintenance wind power monitoring
③ Prediction of wind power in offshore wind farms