Nanjing Movelaser Co., Ltd.

MOVELASER Laser Wind Measurement Solution Expert.

Manufacturer from China
Verified Supplier
4 Years
Home / Products / Floating Lidar System /

IP67 24VDC Floating Lidar System With Temperature Humidity Sensor

Contact Now
Nanjing Movelaser Co., Ltd.
Visit Website
City:nanjing
Country/Region:china
Contact Person:Missivyyao
Contact Now

IP67 24VDC Floating Lidar System With Temperature Humidity Sensor

Ask Latest Price
Brand Name :MOVELASER
Model Number :Molas B300M
Place of Origin :China
MOQ :1 set
Price :Dollar 7W$+ (Price consultation customer service)
Payment Terms :L/C, D/A, D/P, T/T
Supply Ability :200 set ,1 month
Delivery Time :1-2 months
Packaging Details :Air Box
Protection class :IP67 (complete machine)
Measuring wind speed range :0~75m/s
Size :682mm x 520mm x 641mm
Powered by :24V DC / 100~240V
Power :70W
Weight :<75kg
Range of working temperature :-40℃ ~ 50℃(with over temperature protection)
Operating humidity range :0% to 100%
Eye safety :Class 1M (EN60825-1)
Sampling rate :1Hz
Wind direction measurement range :0~360°
Sweep cone angle :28°
more
Contact Now

Add to Cart

Find Similar Videos
View Product Description

Temperature, humidity and pressure sensor installation Lidar System

1,Product introduction

In order to facilitate data transmission when the equipment is running in the field, the Molas B300/B300M wind-measuring lidar is equipped with a network communication module. This module requires customers to prepare a 4G data card with a flow of more than 10G for a month before installation. Please note that it must be a standard card (Kcal), the installation process of the communication module is as follows:


1) Open the SIM card installation cover with a flat-blade screwdriver;
Figure 10 Open the installation cover
2) As shown in the figure, insert the prepared SIM card into the card slot, so that the chip surface of the card is in contact with the bumps of the card slot, and be careful not to pull the card slot forcibly;
3) After confirming that the installation is correct, close the cover and tighten it with a screwdriver;
The WIFI user name is molas-B300, the initial password is "movelaser.com", and the lidar can be directly connected. Once installed, the installer can use your phone or laptop to connect to WIFI to check the network speed. This feature may not be available in some areas due to poor network signal in some areas.

2,Product parameters

General parameters
Powered by 24V DC / 100~240V
Power 70W
Size 682mm x 520mm x 641mm
Weight <75kg
Range of working temperature -40℃ ~ 50℃(with over temperature protection)
Operating humidity range 0% to 100%
Protection class IP67 (complete machine)
Eye safety Class 1M (EN60825-1)

Measurement parameters
Measuring distance 30~300m
Measurement layer 12
Sampling rate 1Hz
Wind speed measurement accuracy 0.1m/s
Wind direction measurement accuracy
Wind speed measurement range 0~75m/s
Wind direction measurement range 0~360°
Sweep cone angle 28°

Data parameter
Data output Horizontal wind speed, vertical wind speed, wind direction
Timestamp, GPS, temperature, humidity and pressure, statistics
Data Format ASCII
Communication Ethernet (100BASE-TX)
3G/4G
WiFi, satellite communication (optional)

3,Application scenarios

① Early detection of wind resources

IP67 24VDC Floating Lidar System With Temperature Humidity Sensor

② Offshore construction and operation and maintenance wind power monitoring

IP67 24VDC Floating Lidar System With Temperature Humidity Sensor

③ Prediction of wind power in offshore wind farms

IP67 24VDC Floating Lidar System With Temperature Humidity Sensor

Inquiry Cart 0